4.3.3. Procedure – Routing uncontrolled traffic between logical interfaces

Purpose: 

You can enable routing between logical interfaces, which allows you to direct uncontrolled traffic through PSM.

Steps: 

  1. Navigate to Basic Settings > Network > IP forwarding.

    Figure 4.11. Basic Settings > Network > IP forwarding — IP forwarding between interfaces

    Basic Settings > Network > IP forwarding — IP forwarding between interfaces
  2. To add a new forwarding rule, choose and select the two logical interfaces to connect. You can select the same interface in both fields to use that logical interface in single-interface router mode.

    To delete an existing rule, choose .

  3. Click .