Zorp Professional 6 Log Messages Guide

This documentation and the product it describes are considered protected by copyright according to the applicable laws.

This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/). This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)

The BalaBit™ name and the BalaBit™ logo are registered trademarks of BalaBit IT Security Ltd..

The BalaBit Shell Control Box™ name and the BalaBit Shell Control Box™ logo are registered trademarks of BalaBit.

Hadoop™ and the Hadoop elephant logo are trademarks of the Apache Software Foundation.

Linux™ is a registered trademark of Linus Torvalds.

The syslog-ng™ name and the syslog-ng™ logo are registered trademarks of BalaBit.

Windows™ 95, 98, ME, 2000, XP, Server 2003, Vista, Server 2008, 7, 8, and Server 2013 are registered trademarks of Microsoft Corporation.

The Zorp™ name and the Zorp™ logo are registered trademarks of BalaBit.

All other product names mentioned herein are the trademarks of their respective owners.

DISCLAIMER

BalaBit is not responsible for any third-party Web sites mentioned in this document. BalaBit does not endorse and is not responsible or liable for any content, advertising, products, or other material on or available from such sites or resources. BalaBit will not be responsible or liable for any damage or loss caused or alleged to be caused by or in connection with use of or reliance on any such content, goods, or services that are available on or through any such sites or resources.

April 17, 2015


Table of Contents

Preface
1. Single-line log message for connections
1. Zorp log messages
1.1.
1.1.1. Signal received, stackdump follows
1.1.2. Invalid license file
1.1.3. Error initializing Python policy engine
1.1.4. Matching regexp found
1.1.5. Error opening match file
1.1.6. Error opening ignore file
1.1.7. Cached recipient match found
1.1.8. Recipient validity not cached, trying the direct way
1.1.9. SMTP sender was rejected, unable to verify user existence
1.1.10. Server accepted recipient
1.1.11. Server rejected recipient
1.1.12. SMTP error during recipient validity checking
1.1.13. Instance definition not found in policy
1.1.14. Error downloading KZorp configuration, Python traceback follows
1.1.15. Deinitialization requested for instance
1.1.16. Cleaning up instance
1.1.17. Error flushing KZorp configuration
1.1.18. Outbound connection not permitted
1.1.19. Error resolving hostname
1.1.20. Server connection failure
1.1.21. Server connection established
1.1.22. Server connection failure, no destination
1.1.23. All destinations are down, clearing cache and trying again
1.1.24. Destination is down, skipping
1.1.25. Destination is down, keeping state
1.1.26. Side stacking failed, socketPair failed
1.1.27. Side-stacking proxy instance
1.1.28. Side-stacking failed
1.1.29. Proxy ending
1.1.30. Proxy destroy
1.1.31. Error while stacking child proxy
1.1.32. Stacking custom child
1.1.33. User authentication successful
1.1.34. Before NAT mapping
1.1.35. After NAT mapping
1.1.36. Starting proxy instance
1.1.37. Ending proxy instance
1.1.38. Cache over shift-threshold, shifting
1.1.39. Evaluating BACL rule
1.1.40. BACL result
1.1.41. Unable to determine service, KZorp service lookup failed
1.1.42. No applicable service found for this client zone (cached)
1.1.43. No applicable service found for this client zone
1.1.44. No applicable service found for this client & server zone (cached)
1.1.45. No applicable service found for this client & server zone
1.1.46. Unexpected EOF while transferring from server
1.1.47. I/O error opening error file
1.1.48. Eofmask is updated
1.1.49. Data transfer timed out
1.1.50. Data transfer interrupted by progress
1.1.51. Stacked proxy rejected contents
1.1.52. Policy type is invalid
1.1.53. Cannot parse stack policy line
1.1.54. Cannot parse stack policy line
1.1.55. Error in policy call
1.1.56. Cannot parse return code
1.1.57. Internal error, not enough literals
1.1.58. Internal error, too many literals
1.1.59. Error while writing policy response
1.1.60. Error while writing policy response
1.1.61. Failed to parse command
1.1.62. Error writing to client
1.1.63. Reconstructed request
1.1.64. Illegal tag
1.1.65. Duplicate tag
1.1.66. Command not allowed in this state
1.1.67. Error parsing command
1.1.68. Request denied by policy
1.1.69. Dropping request
1.1.70. Policy responds to client
1.1.71. Aborting connection due to request
1.1.72. Too many pending requests
1.1.73. Error writing to server
1.1.74. Stray continuation response
1.1.75. Error writing to server
1.1.76. Error writing to server
1.1.77. Error writing to server
1.1.78. Server returned untagged line during authentication exchange, dropping it
1.1.79. Aborting connection due to a response
1.1.80. Dropping response
1.1.81. Invalid response
1.1.82. Error writing to client
1.1.83. Response arrived for unknown request
1.1.84. Aborting connection due to a response
1.1.85. Dropping response
1.1.86. Invalid response
1.1.87. Error writing to client
1.1.88. Complete response arrived
1.1.89. Reconstructed response
1.1.90. Reading literal
1.1.91. No free literal space
1.1.92. Illegal character
1.1.93. Illegal literal length form
1.1.94. Literal length attribute not closed
1.1.95. Response count for the request reached limit, drop packets
1.1.96. Response count for request reached limit, aborting connection
1.1.97. Invalid value for response_overrun_action, falling back to LDAP_RSP_DROP
1.1.98. Error reading request
1.1.99. Request details
1.1.100. Parse error, dropping request
1.1.101. Invalid character, dropping request
1.1.102. Username too long, dropping request
1.1.103. One hostname is too long in hostname chain, dropping request
1.1.104. Error write request
1.1.105. Error write request
1.1.106. Error write request
1.1.107. Error write request
1.1.108. Policy violation, abort session
1.1.109. Policy violation, drop session
1.1.110. fetching request
1.1.111. asking policy
1.1.112. connecting server
1.1.113. sending request
1.1.114. copying response
1.1.115. everything is done
1.1.116. Policy nesting do deep
1.1.117. Policy type invalid
1.1.118. Cannot parse policy line
1.1.119. Cannot parse policy line
1.1.120. Cannot parse policy line
1.1.121. Cannot parse policy line
1.1.122. Error in policy calling
1.1.123. Policy does not contain this header, using hard-coded default
1.1.124. Policy does not contain this mime-type, using hard-coded default
1.1.125. Answer type invalid
1.1.126. Bad policy line
1.1.127. Error in policy calling
1.1.128. Return code invalid from policy function
1.1.129. Policy does not contain this error, using hard-coded default
1.1.130. Cannot parse policy line
1.1.131. Error in policy calling
1.1.132. Error parsing return code
1.1.133. Data connection accepted on client side
1.1.134. Data connection accepted on server side
1.1.135. Data connection established on client side
1.1.136. Connected to client, but connection is not expected
1.1.137. Data connection established on server side
1.1.138. Connected to server, but connection is not expected
1.1.139. Internal error, previous dispatcher not unregistered
1.1.140. Internal error, previous attach not unregistered
1.1.141. Internal error, previous attach not unregistered
1.1.142. Internal error, previous dispatcher not unregistered
1.1.143. Resetting data connection
1.1.144. Internal error, previous data connection is not closed properly
1.1.145. Internal error, cannot start data proxy because peers are not yet connected
1.1.146. Internal error, current command descriptor does not specify data transfer
1.1.147. Data connection established
1.1.148. Possible bounce attack
1.1.149. Possible bounce attack
1.1.150. Possible bounce attack
1.1.151. Possible bounce attack
1.1.152. Internal error, client side not connected
1.1.153. Internal error, server side not connected
1.1.154. Max_line_length above upper limit
1.1.155. Max_username_length above max_line_length
1.1.156. Max_password_length above max_line_length
1.1.157. Max_hostname_length above max_line_length
1.1.158. Error parsing valid_chars_username
1.1.159. Internal error in stream write, side is wrong
1.1.160. Cannot write full line
1.1.161. Server answer doesn't begin with number
1.1.162. Response arrived
1.1.163. Error reading from server
1.1.164. Line is too short to be a valid answer
1.1.165. Server answer has wrong continuation mark
1.1.166. Rejected answer
1.1.167. Error reading from client
1.1.168. Request fetched
1.1.169. Empty command. Aborting
1.1.170. Unknown command. Aborting
1.1.171. Internal error, known command but command parse is unset
1.1.172. This command not allowed in non-transparent mode
1.1.173. Request rejected
1.1.174. Proxy answer
1.1.175. Rejected command (aborting)
1.1.176. Bad policy type, aborting
1.1.177. Too many continuous lines in the answer
1.1.178. Reading from peer
1.1.179. Invalid port specified in non-transparent destination
1.1.180. Invalid character in username
1.1.181. Hostname specified in username is too long
1.1.182. Username too long
1.1.183. Username too long
1.1.184. Invalid character in username
1.1.185. Internal error, proxy in unknown state
1.1.186. Internal error, proxy in unknown state
1.1.187. Password too long
1.1.188. Password too long
1.1.189. Internal error, proxy in unknown state
1.1.190. Internal error, proxy in unknown state
1.1.191. Internal error, proxy in unknown state
1.1.192. Unexpected response to data transfer command
1.1.193. Internal error, proxy in unknown state
1.1.194. Invalid parameter for command
1.1.195. Invalid parameter for command
1.1.196. Internal error, proxy in unknown state
1.1.197. Missing parameter for the TYPE command
1.1.198. Valid, but unsupported transfer type specification
1.1.199. Unknown transfer type specification
1.1.200. Missing parameter to the MODE command
1.1.201. Invalid parameter to the MODE command
1.1.202. Missing parameter to the STRU command
1.1.203. Invalid parameter to the STRU command
1.1.204. Error preparing server-side data connection (PORT)
1.1.205. There was an error binding a server-side listener
1.1.206. Error parsing PASV response
1.1.207. Error preparing data connection to the server (PASV)
1.1.208. Error preparing server-side data connection listener (EPRT)
1.1.209. Cannot bind to the given address (EPRT)
1.1.210. Missing parameter (EPSV)
1.1.211. Bad parameter (EPSV), not beginning with bracket
1.1.212. Bad parameter (EPSV), not closing with bracket
1.1.213. Error parsing EPSV response
1.1.214. Bad parameter (EPSV), invalid port
1.1.215. Internal error, cannot detect server address
1.1.216. Unknown protocol type (EPSV)
1.1.217. Error preparing data connection to the server (EPSV)
1.1.218. Invalid parameters to the PORT command
1.1.219. Connection mode not supported
1.1.220. Error preparing client-side data connection (PORT-<;PASV)
1.1.221. Error parsing the server answer to the PASV command (PORT-<;PASV)
1.1.222. Error preparing client-side data connection (PORT)
1.1.223. Error parsing the server answer to the PORT command
1.1.224. Connection mode not supported
1.1.225. Error preparing client-side data connection listener (PASV)
1.1.226. Error preparing client-side data connection listener (PASV)
1.1.227. Error preparing client-side data connection listener (PASV-<;PORT)
1.1.228. Error preparing client-side data connection listener (PASV-<;PORT)
1.1.229. Error parsing the server answer to the PORT command (PASV-<;PORT)
1.1.230. Missing parameter (EPRT)
1.1.231. Bad parameter (EPRT)
1.1.232. Bad port parameter (EPRT)
1.1.233. Unknown protocol method (EPRT)
1.1.234. Bad host address (EPRT)
1.1.235. Connection mode not supported
1.1.236. Error preparing client connect (EPRT)
1.1.237. Bad server answer (EPRT)
1.1.238. Error preparing client connect (EPRT)
1.1.239. Connection mode not supported
1.1.240. Error preparing client listen (EPSV)
1.1.241. Error preparing client listen (EPSV)
1.1.242. Error preparing client listen (EPSV)
1.1.243. Error preparing client listen (EPSV)
1.1.244. Bad server answer (EPSV)
1.1.245. Error parsing command (ALLO)
1.1.246. Invalid stacking tuple returned by policy
1.1.247. Invalid stacking type
1.1.248. Invalid request, data transfer failed
1.1.249. Data transfer failed
1.1.250. Stacked proxy decision
1.1.251. Stacked proxy accepted data
1.1.252. Client foreign port below 1024
1.1.253. Server foreign port below 1024 in passive mode
1.1.254. Server foreign port is not good in active mode
1.1.255. Unknown side when calling bounceCheck
1.1.256. Policy does not contain this request, using hard-coded default
1.1.257. Policy type invalid
1.1.258. Cannot parse policy line
1.1.259. Error in policy calling
1.1.260. Can't parsing return code
1.1.261. Policy does not contain this response, using hard-coded default
1.1.262. Answer type invalid
1.1.263. Bad policy line
1.1.264. Error in policy calling
1.1.265. Return code invalid from policy function
1.1.266. Policy does not contain this feature, dropping
1.1.267. Policy value invalid
1.1.268. Response line too long
1.1.269. Response status is invalid
1.1.270. Response fetched with parameter
1.1.271. Response fetched
1.1.272. Data transfer failed
1.1.273. Request line too long
1.1.274. Request fetched with parameter
1.1.275. Request fetched
1.1.276. Unknown request command
1.1.277. Request command not allowed in this state
1.1.278. Dropping request parameter, no parameter allowed
1.1.279. The required numerical parameter of the request is missing
1.1.280. The numerical parameter of the request is not in the given range
1.1.281. The numerical parameter of the request is negative
1.1.282. The numerical parameter of the request is zero
1.1.283. The numerical parameter of the request contains junk after the number
1.1.284. The first numerical parameter of the request is not in the given range
1.1.285. The first numerical parameter of the request is negative
1.1.286. Only one numerical argument in request
1.1.287. The second numerical parameter of the request is not in the given range
1.1.288. The second numerical parameter of the request is a negative number
1.1.289. The numerical parameter of the request contain junk after the number
1.1.290. Username is too long
1.1.291. Password is too long
1.1.292. The username parameter is too long or the digest parameter is missing
1.1.293. Error parsing the MD5 digest
1.1.294. The required numerical parameter of the response is missing
1.1.295. The numerical parameter of the response is not in the given range
1.1.296. The numerical parameter of the response is a negative number
1.1.297. The numerical parameter of the response contains junk after the number
1.1.298. The numerical parameter of the response is not in the given range
1.1.299. The required numerical parameter of the response is missing
1.1.300. The numerical parameter of the response is a negative number
1.1.301. The second numerical parameter of the response is not in the given range
1.1.302. The required second numerical parameter of the response is missing
1.1.303. The second numerical parameter of the response is a negative number
1.1.304. The second numerical parameter of the response contains junk after the number
1.1.305. Stacked proxy rejected contents
1.1.306. Policy does not contain this request, using hard-coded default
1.1.307. Policy type is invalid
1.1.308. Cannot parse policy line
1.1.309. Error in policy call
1.1.310. Cannot parse the return code
1.1.311. Policy does not contain this request, using hard-coded default
1.1.312. Policy type is invalid
1.1.313. Cannot parse policy line
1.1.314. Error in policy call
1.1.315. Cannot parse return code
1.1.316. Stack policy type is invalid
1.1.317. Cannot parse stack policy line
1.1.318. Cannot parse stack policy line
1.1.319. Error in policy call
1.1.320. Cannot parse return code
1.1.321. Invalid stacking type
1.1.322. Invalid stacking tuple returned by policy
1.1.323. Request method empty, or too long
1.1.324. URL missing, or too long
1.1.325. Protocol version missing, or too long
1.1.326. Request details
1.1.327. Invalid HTTP status line
1.1.328. Response version empty or too long
1.1.329. Response code empty or too long
1.1.330. Response details
1.1.331. Unknown protocol version
1.1.332. Unknown protocol version
1.1.333. Internal error, error code out of range
1.1.334. An error occurred, would serve error file, but silent mode is enabled
1.1.335. An error occurred, serving error file
1.1.336. Error writing stream, stream is NULL
1.1.337. Error writing stream
1.1.338. Only Basic authentication is supported
1.1.339. Invalid base64 encoded username:password pair
1.1.340. No colon is found in the decoded username:password pair
1.1.341. Invalid HTTP request received
1.1.342. Found category match for URL
1.1.343. CONNECT method without version specification
1.1.344. This request type is not permitted in transparent mode
1.1.345. No host header in transparent request, 'unknown' is used instead
1.1.346. 'Host:' header is required, and HTTP/0.9 can't transfer headers
1.1.347. No 'Host:' header in request, and policy requires this
1.1.348. Error parsing URL
1.1.349. Error parsing URL
1.1.350. Client attempted to use FTP over HTTP, which is currently disabled
1.1.351. Unsupported scheme in URL
1.1.352. Too long hostname in URL
1.1.353. Accounting
1.1.354. Invalid item in request hash
1.1.355. Error parsing HTTP_REQ_POLICY tuple in request hash
1.1.356. Error parsing HTTP_REQ_REJECT in request hash
1.1.357. Unknown request hash item
1.1.358. Policy requested to send custom response
1.1.359. Request not permitted by policy
1.1.360. Request not permitted by policy
1.1.361. Connecting to this port is prohibited by policy
1.1.362. Internal error initializing server stream
1.1.363. Error in HTTP/0.9 compatibility code, line buffer full
1.1.364. Server falled back to HTTP/0.9 which is prohibited by policy
1.1.365. Invalid HTTP response heading
1.1.366. Error parsing response version
1.1.367. Unsupported protocol version
1.1.368. Invalid response hash item
1.1.369. Error parsing HTTP_RSP_POLICY in response hash
1.1.370. Error parsing HTTP_RSP_REJECT in response hash
1.1.371. Invalid response hash item
1.1.372. Response not permitted by policy
1.1.373. Missing port number in CONNECT request
1.1.374. Parent proxy refused our CONNECT request
1.1.375. Starting connect method
1.1.376. Internal error, connectMethod is expected to return a proxy instance
1.1.377. Fetching request and headers
1.1.378. processing request and headers
1.1.379. Maximum keep-alive request reached, setting connection mode to close
1.1.380. Filtering request and headers
1.1.381. Reprocessing filtered request
1.1.382. Sending request and headers, copying request data
1.1.383. Fetching response and headers
1.1.384. Processing response and headers
1.1.385. Filtering response and headers
1.1.386. Copying response and headers, copying response data
1.1.387. Internal error, invalid server_protocol
1.1.388. exiting keep-alive loop
1.1.389. Http accounting
1.1.390. Request administratively prohibited
1.1.391. Chunk length line too long
1.1.392. Invalid chunk length
1.1.393. Invalid chunk length
1.1.394. Chunk too large
1.1.395. Unexpected EOF while dechunking stream
1.1.396. Chunk footer is not an empty line
1.1.397. Stacked proxy sent a content-length hint, using it
1.1.398. Invalid stacking tuple returned by policy
1.1.399. Invalid stacking type
1.1.400. The header 'Content-Length' was present, but is not a number
1.1.401. Invalid request, data transfer failed
1.1.402. Data transfer failed
1.1.403. Stacked proxy decision
1.1.404. Stacked proxy accepted data
1.1.405. Invalid FTP response, line too short
1.1.406. Invalid FTP response, response code not numeric
1.1.407. Invalid FTP response, continuation line contains different status code
1.1.408. FTP server returned an unhandled status code for the login request
1.1.409. Error logging in
1.1.410. Error in FTP greeting, expecting 220
1.1.411. Error changing directory on server
1.1.412. Error changing directory on server
1.1.413. Error changing directory on server
1.1.414. Error sending RETR or LIST command to FTP server
1.1.415. Error establishing data connection to FTP server
1.1.416. Error reading data channel confirmation from FTP server
1.1.417. Error reading 226 from FTP server
1.1.418. Invalid HTTP_HDR_CHANGE_NAME rule in header processing
1.1.419. Invalid HTTP_HDR_CHANGE_VALUE rule in header processing
1.1.420. Invalid HTTP_HDR_CHANGE_BOTH rule in header processing
1.1.421. Invalid value in header action tuple
1.1.422. Error reading from peer while fetching headers
1.1.423. First header starts with white space
1.1.424. Invalid HTTP header
1.1.425. Too many header lines
1.1.426. Stack policy type is invalid
1.1.427. Cannot parse stack policy line
1.1.428. Error in policy call
1.1.429. Cannot parse return code
1.1.430. Stacked proxy rejected contents
1.1.431. Invalid return value of packetStats(), integer required
1.1.432. packetStats() requested to abort session
1.1.433. Buffer overflow during protocol decoding, aborting session
1.1.434. Sender address administratively prohibited
1.1.435. Sender check successful
1.1.436. Forbidden percent found in address local-part
1.1.437. Forbidden exclamation mark found in address local-part
1.1.438. Relaying denied
1.1.439. Relay check successful
1.1.440. Recipient address administratively prohibited
1.1.441. Recipient check successful
1.1.442. Relay check, checking client_zone
1.1.443. Relay check, checking mail domain
1.1.444. Invalid command verb in request
1.1.445. Request parsed
1.1.446. Fetching request
1.1.447. Request line too long
1.1.448. Processing request
1.1.449. Command not permitted in this state
1.1.450. Unknown command
1.1.451. Copying request to server
1.1.452. Error sending request
1.1.453. Fetching authentication request
1.1.454. Auth request line too long
1.1.455. Copying authentication request to server
1.1.456. Error sending authentication request
1.1.457. SMTP reply contains non-numeric characters
1.1.458. Invalid continuation character
1.1.459. Fetching response
1.1.460. Response line too long
1.1.461. Invalid SMTP reply, reply code changed
1.1.462. Response parsed
1.1.463. Processing response
1.1.464. Copying response to client
1.1.465. Error sending SMTP reply
1.1.466. Invalid policy ignored, allowing 250 response to NOOP is required
1.1.467. Invalid policy ignored, allowing 354 response to DATA is required
1.1.468. Invalid contents
1.1.469. Error occurred while scanning contents
1.1.470. Rejecting empty message
1.1.471. Error sending RSET to the server
1.1.472. Exiting SMTP loop
1.1.473. Invalid request policy type
1.1.474. Error in request policy
1.1.475. Error in request policy
1.1.476. The verdict returned by the policy is not an int
1.1.477. Invalid response policy
1.1.478. Error in response policy
1.1.479. Error in response policy
1.1.480. The verdict returned by the policy is not an int
1.1.481. Error parsing local part
1.1.482. Local part does not end in '@'
1.1.483. Invalid domain name in path
1.1.484. Path does not start with '>;'
1.1.485. Invalid source route information
1.1.486. Invalid address information
1.1.487. Path does not begin with '>;' but ends with '<;'
1.1.488. Path begins with '>;' but does not end with '<;'
1.1.489. Invalid SIZE extension in the MAIL command
1.1.490. Invalid BODY extension in the MAIL command
1.1.491. Invalid AUTH sender, not an xtext
1.1.492. Invalid extension in the MAIL command
1.1.493. Failed to parse URL filter database
1.1.494. Connection denied by policy
1.1.495. Dispatcher on address
1.1.496. Cannot configure the ADP session
1.1.497. Cannot create the ADP session
1.1.498. Error opening socket
1.1.499. Error connecting UDP socket (nf)
1.1.500. Error querying local address (nf)
1.1.501. Error during setsockopt(SOL_IP, IP_RECVORIGADDRS)
1.1.502. Error during setsockopt(SOL_IPV6, IPV6_RECVORIGADDRS)
1.1.503. Cannot create socket
1.1.504. Sending the RECEIVED payload to ADP as SENT for processing
1.1.505. Sending the RECEIVED payload to ADP for processing
1.1.506. Sending the SENT payload to ADP as RECEIVED for processing
1.1.507. Sending the SENT payload to ADP for processing
1.1.508. Sending the META payload to ADP for processing
1.1.509. Sending the START payload to ADP for processing
1.1.510. Cannot create the alerting session, the alerting service is turned off
1.1.511. Alerting session is deinitialized
1.1.512. ADP does not send user data when event is detected
1.1.513. Audit component has received ADP event
1.1.514. Connection needs to be terminated
1.1.515. Connecting to remote host
1.1.516. Error creating client socketpair for stacked proxy
1.1.517. Error creating server socketpair for stacked proxy
1.1.518. Stacking subproxy
1.1.519. Stacking subproxy
1.1.520. Error creating control socketpair for stacked proxy
1.1.521. Stacking program
1.1.522. Module successfully loaded
1.1.523. Module loading failed
1.1.524. Session ID not found for authorization
1.1.525. calling event
1.1.526. calling __destroy__() event
1.1.527. Internal error, trying to look up a non-ZProxyIface compatible interface
1.1.528. Error creating proxy thread
1.1.529. User initiated proxy termination request received
1.1.530. Proxy received ADP event
1.1.531. Error calling python method handleAlertingEvent
1.1.532. Processing ADP event is done
1.1.533. Invalid maximum aggregator, no source node
1.1.534. Invalid maximum aggregator, no source node
1.1.535. Failed to parse interval from node name
1.1.536. Invalid average aggregator, no source node
1.1.537. Failed to create SZIG socket
1.1.538. Error calling AuthenticationProvider method
1.1.539. Trying verification without CRL check as directed by the policy
1.1.540. CRL has invalid nextUpdate field
1.1.541. CRL is expired
1.1.542. CRL not found for certificate
1.1.543. CRL not found for certificate
1.1.544. Dispatch thread starting
1.1.545. Accept queue stats
1.1.546. Dispatch thread exiting
1.1.547. Error creating dispatch thread, falling back to non-threaded mode
1.1.548. Incoming connection
1.1.549. Nobody was interested in this connection
1.1.550. Transparent listener connected directly, dropping connection
1.1.551. Error registering dispatch, previous entry specified accept_one
1.1.552. Internal error, dispatch entry not found (chain exists)
1.1.553. Internal error, dispatch entry not found (no chain)
1.1.554. Alerting config is NULL
1.1.555. Cannot find proxy module
1.1.556. Cannot find proxy module
1.1.557. Attribute fetched
1.1.558. Attribute changed
1.1.559. Error booting & parsing policy
1.1.560. Error initializing policy
1.1.561. Error loading initial policy, exiting
1.1.562. Error initializing audit system
1.1.563. Reloading policy
1.1.564. Error reloading policy, reverting to old
1.1.565. Error opening policy file
1.1.566. Error parsing policy file
1.1.567. Error connecting to satyrd
1.1.568. Satyr authentication failed, unable to determine target address
1.1.569. Satyr authentication failed, cannot connect to client
1.1.570. Error connecting to satyr, SSL handshake failed
1.1.571. Satyr authentication failed, unknown address family
1.1.572. Satyr authentication failed, unable to write request information
1.1.573. Satyr authentication failed, error reading answer
1.1.574. eofmask updated
1.1.575. Packet stats timeout elapsed, and no timeout callback specified
1.1.576. Internal error in z_policy_stream_new: input ZStream is NULL
1.1.577. Established connection
1.1.578. Error parsing satyr command
1.1.579. Error writing zas stream
2. Zorp Management Server log messages
2.1.
2.1.1. Module successfully loaded
2.1.2. Module loading failed
2.1.3. Module loading failed
2.1.4. Module loading failed
2.1.5. Module loading failed
2.1.6. Cannot open plugin directory
2.1.7. Signal received, stackdump follows
2.1.8. SIGHUP received, reloading config
2.1.9. Module loading failed
2.1.10. Cannot open plugin directory
3. ZMS Transfer Agent log messages
3.1.
3.1.1. Signal received, stackdump follows
4. Zorp Authentication Server log messages
4.1.
4.1.1. Module successfully loaded
4.1.2. Module initialization failed
4.1.3. Error dlopening module
4.1.4. Cannot open plugin directory
4.1.5. Signal received, stackdump follows
5. Zorp Authentication Agent log messages
5.1.
5.1.1. Signal received, stackdump follows
5.1.2. Signal received, stackdump follows
6. Zorp Content Vectoring Server log messages
6.1.
6.1.1. Signal received, stackdump follows
6.1.2. Module successfully loaded
6.1.3. Module initialization failed
6.1.4. Error dlopening module
6.1.5. Cannot open plugin directory
A. Creative Commons Attribution Non-commercial No Derivatives (by-nc-nd) License