6.6. Sealed mode

When sealed mode is enabled, the following settings are automatically applied:

  • PSM cannot be accessed remotely via SSH for maintenance.

  • The root password of PSM cannot be changed in sealed mode.

  • It is not possible to upload or delete plugins in sealed mode.

  • Sealed mode can be disabled only from the local console. For details, see Procedure 6.6.1, Disabling sealed mode.

To enable sealed mode use one of the following methods:

  • Select the Sealed mode option during the Welcome Wizard.

  • Select Basic Settings > System > Sealed mode > Activate sealed mode on the PSM web interface.

  • Login to PSM as root using SSH or the local console, and select Sealed mode > Enable from the console menu.