4.6. Configuring system monitoring on PSM

PSM supports the SNMPv2c and SNMPv3 protocols. The SNMP server set on the Management tab can query status information from PSM.

Tip

In order have your central monitoring system to recognize the SNMP alerts sent by PSM, import the PSM-specific Management Information Base (MIB) into your monitoring system. Download all MIBs by navigating to Basic Settings > Alerting & Monitoring and clicking Download MIBs and import them into your monitoring system. For details, see the documentation of your monitoring system.

Figure 4.19. Basic Settings > Alerting & Monitoring — Configuring SNMP and e-mail alerting

Basic Settings > Alerting & Monitoring — Configuring SNMP and e-mail alerting
Basic Settings > Alerting & Monitoring — Configuring SNMP and e-mail alerting
Basic Settings > Alerting & Monitoring — Configuring SNMP and e-mail alerting

The following sections describe the parameters you can receive alerts on.